You are here

Pool Heating

Mechanical Equipment & Control Strategies for a Chilled water and a Hot water system (2008)

Submitted by Hans Craen on April 19, 2009

This report from 2008 falls within the framework of the Internal Energy Agency’s Solar Heating and Cooling Programme.

The objective of this report is to undertake pre-normative research to develop a comprehensive and integrated suite of building energy analysis tool tests involving analytical, comparative, and empirical methods.

These methods will provide for quality assurance of software some of which will be enacted in specific standards to be used for certifying software used for showing compliance to building energy standards.

Solar Thermal Energy: Harnessing the Power of the Sun

Submitted by Nigel Cotton on October 12, 2008
The video shows the use of solar thermal energy for heating in Europe. Examples from Denmark and Spain show the use in different climates. Interviews with users and manufacturers give a good overview of this clean energy technology. The video is provided for free by the Sustainable Energy Europe Campaign of the European Union.

Process Heat: the Solar Thermal Challenge of the Future

Submitted by Baerbel Epp on May 15, 2008

So far solar thermal technology is mostly used for domestic hot water, pool heating and room heating. It´s often forgotten that there is a huge demand for heat below 250 °C in industry, which can easily be reached with solar thermal collectors.

An international team of researchers working on behalf of the International Energy Agency estimated the realisable potential of solar process heat in the European Union at 100 GWth, which corresponds to 140 million m2 of collector area. T

Today, however, a solar thermal capacity of only 13.5 GWth is in operation across Europe. Task 33 of the International Energy Agency reported 85 solar process heat plants worldwide with a capacity of 27 MWth. However, this market segment seems to be waking up. Just recently, news about huge solar process heat installations did the rounds. There is the 13,000 m2 plant in Hangzhou, China, on the roof of the textile dyeing factory Daly Ltd., which is most probably the biggest installation for solar process heat in the world. The total investment adds up to RMB 12 million (€ 1.11 million) including the tanks and mounting system. According to the project developer, the Chinese company Shenzhen Quir Solar Technology Co., Ltd, the solar collectors will save RMB 3.38 million (€ 0.31 million) per year, so that the investment will pay off within 3 years. The hot water is provided at a low temperature of 55 °C. Secondly, this summer the German brewery Hofmühl GmbH in Eichstätt will start operating a pilot plant with 1,389 m2 of vacuum tube collectors, which will supply process heat between 90 and 140 °C to the brewing and cleaning processes. The owner of the system estimates a reduction of 20 % in the annual energy demand of the factory. The company is convinced that the investment will pay off and has plans for subsequent upsizing to 3,000 m2. The project is being subsidised by the German Federal Ministry for the Environment, Nature Conservation and Nuclear Safety.

What are the main topics for the future to open this new market sector?

Is there enough sunshine in all regions?

Submitted by Baerbel Epp on May 9, 2008

Solar thermal systems produce hot water whether the system is installed in Sweden, Germany, India, Tunisia or South America. The annual yield depends on the application (domestic hot water, pool heating, space heating), the local climatic conditions and system dimensioning (high or low solar fraction).

What are solar thermal systems made of?

Submitted by Baerbel Epp on May 9, 2008

Flat plat collectors are made of metal, glass, insulating and joining materials. Typically copper, steel or aluminium is used for the absorber configuration. The sides and bottom of the collector are usually metal and insulated with mineral wool to minimize heat loss. The glass top is made of special glass to resist facture and maximise transmission of energy. In the future, a variety of materials and combinations of materials including plastics may be used to improve cost benefits ratios, higher temperature ranges and systems performance.

What can solar thermal technology be used for?

Submitted by Baerbel Epp on May 9, 2008

There is a wide variety of applications for solar thermal technology. The most common application is the heating of pool water, the heating of domestic hot water and space heating. Not very wide spread yet are solar cooling systems, because of the complexity of the technology and the high initial investment costs.

Which are the major solar thermal markets worldwide?

Submitted by Baerbel Epp on May 9, 2008

By far the largest solar thermal market in the world according to newly installed solar thermal capacity per year is China. In 2008, around 21 GWth (30 million m2) were sold in China, which was around 80 % of the world global solar thermal market.

Pages

Search results

  • Market sectors : Pool Heating