You are here

Process Heat, Certification

Egypt and India: UNIDO Supports Industrial Solar Heat

Submitted by Baerbel Epp on September 22, 2015
UNIDOThe United Nations Industrial Development Organization (UNIDO) started two projects in the first quarter of this year with the aim of increasing the deployment of solar process heat: January of 2015 marked the launch of a 5-year programme in cooperation with the Indian Ministry of New and Renewable Energy (MNRE) to promote business models for an increased market penetration and scale of concentrated solar thermal heating and cooling applications. Three months later, UNIDO launched the 5-year programme Utilizing Solar Energy for Industrial Process Heat in Egyptian Industry together with the Egyptian Ministry of Industry, Trade and Small and Medium Enterprises. Both projects are funded by the Global Environment Facility (GEF). 
Figure: UNIDO
 

Germany: Label for Existing Heating Boilers to Increase Retrofit Share

Submitted by Baerbel Epp on August 31, 2015
MAP StatisticsFinally some good news from Germany, the largest market in Europe, which declined for four years in a row between 2011 and 2014. After a very sluggish first quarter in 2015, demand for solar thermal systems was increasing over the summer months because of the increased subsidy levels of the German Market Rebate Programme for Renewable Energies since April 2015. The number of applications for solar thermal systems in June and July was 31 % higher than in the previous year. The chart shows the applications submitted per month, with the green columns depicting 2014 and the orange columns representing 2015. And there is more good news for the sector: the announced energy label for existing heating boilers. 
Source: Federal Office for Economic Affairs and Export Control, BAFA
 

Utility Solar Water Heating Initiative and Energy Star (2011)

Submitted by Raquel Ponte Costa on April 7, 2015

This letter was written by Chip Bircher of USH2O, a solar thermal water heating industry group, to the Environmental Protection Agency (EPA). It answers questions that the EPA had regarding solar thermal water heating and its eligibility for the Energy Star Program.

USH2O makes the argument that solar thermal water heating should remain eligible for the Energy Star labeling program. Solar thermal sales have shown consistent growth, and so it is important to maintain the relationship as the use of solar thermal becomes more widespread.

India: Request for proposal: Development of Material and Component Specifications of Six Standards Concentrated Solar Technologies as Reference Document for Maintaining Quality in the Field (2014)

Submitted by Raquel Ponte Costa on October 2, 2014

In its effort to rely more and more on solar thermal energy and increase the use of Concentrated Solar Technologies (CST), the Indian Ministry of New and Renewable Energy has implemented a project, supported by the UNPD/GEF, which aims at developing material and component specifications of 6 standards CSTs as reference document for maintaining quality in the field by manufacturers.  The Ministry has launched a request for proposal and published a bid document.

India: First Stakeholder Workshop for Solar Thermal Roadmap

Submitted by Baerbel Epp on May 17, 2014
Greentech RoadmapWhereas India shows enormous demand for thermal energy in the industry and for cooking, solar thermal has so far only covered 0.2 % of the total heating and cooling need. Therefore it is urgent to scale up the use of decentralised solar thermal technologies. Supported by the Shakti Foundation, consultancy Greentech Knowledge Solutions (GKSPL), located in New Delhi, will prepare a roadmap for scaling up deployment of decentralised solar thermal technologies in India. With plans to publish the roadmap by October 2014, GKSPL organised the first stakeholder workshop in Pune at the end of April, gathering around 40 experts mainly from the solar thermal manufacturing business.
Photo: Jaideep Malaviya
 

Switzerland: Process Heat Collector Performance Testing

Submitted by Baerbel Epp on April 1, 2014

Elimar Frank 1Process heat collectors in the range of 100 to 250 °C represent a rather new type of technology, and test institutes are facing some challenges when trying to test these collectors. Solarthermalworld.org spoke with Dr Elimar Frank, Research Director at the Swiss Institute for Solar Technology, SPF, in Rapperswil. Frank is also Subtask Leader for Process Heat Collector Development and Process Heat Collector Testing in Task 49 of the IEA Solar Heating and Cooling Programme. The chart shows the efficiency curves of different collector types.
Charts: SPF

Canada/Germany: Enerconcept’s Lubi Collectors Eligible for BAFA Grants

Submitted by Baerbel Epp on April 8, 2013

Good news from Germany for Canadian air collector manufacturer Enerconcept: The company has completed its collector tests for the Lubi wall and the roof-mounted Luba GL at the Fraunhofer ISE institute in Freiburg. The collectors meet all of the requirements by the German Federal Office of Economics and Export Control (BAFA) and are now eligible for grants. Enerconcept’s German partner, GoGaS Goch, which will sell the air collectors together with its energy-efficient solutions for heating and process heat, is delighted with the success of the combined systems. Solarthermalworld.org met François Brizard, Development Engineer at Enerconcept (left), and Heiko Schneider, Managing Director of GoGaS Goch, at the ISH fair in Frankfurt, Germany.
Photo: Stephanie Banse

Mechanical Equipment & Control Strategies for a Chilled water and a Hot water system (2008)

Submitted by Hans Craen on April 19, 2009

This report from 2008 falls within the framework of the Internal Energy Agency’s Solar Heating and Cooling Programme.

The objective of this report is to undertake pre-normative research to develop a comprehensive and integrated suite of building energy analysis tool tests involving analytical, comparative, and empirical methods.

These methods will provide for quality assurance of software some of which will be enacted in specific standards to be used for certifying software used for showing compliance to building energy standards.

Search results